① Stadium foundation layer

Check whether the foundation density and flatness of the entire lawn site meet the requirements; Clean the foundation, and the surface of the foundation should be flat, dry, and free of debris;

Find the midpoint of the field and determine the accurate position of each point and line on the field based on the midpoint. According to the actual situation of the sports venue, deploy the ground wire.

To ensure accurate construction and line drawing, solid and distinct markers should be used to mark the various lines of the site.

② Bottom adhesive layer

Apply lawn adhesive evenly on a dry and clean foundation surface.

③ Cushion

Paste the buffer pad on the basis of the applied adhesive, and note that the buffer pad needs to be firmly bonded.

④ Adhesive layer

Use a brush to evenly apply the lawn adhesive to the surface of the buffer pad and the lawn base cloth. According to the actual conditions such as temperature and humidity at that time, the drying time should be reasonably controlled. Generally, within 5 to 15 minutes after applying glue, the glue should reach 80% to 90% dry, and it is advisable to touch it without touching it.

When bonding, it is required to align and adhere at once, and it is not allowed to move the object to be bonded back after bonding. Pay attention to the appropriate application speed and strictly control the thickness of the adhesive.

⑤ Artificial turf layer

After bonding, remove surface debris to make the surface fully contact and compact, making the bonding more firm. The curing time is generally. After bonding, clean the cut grass fragments on the site before scattering quartz sand and rubber particles.

⑥ Quartz sand filling layer

After the installation of the artificial lawn sports field is completed, quartz sand can be laid. The specialized quartz sand paving machine for artificial grass should be laid from the outside to the inside, and the paving machine's forward speed and spreading amount should be evenly distributed. Quartz sand should be 20-40 mesh, with a reference dosage of 28-32kg/m ² (50mm grass).

Impurities need to be removed in quartz sand paving. After the paving is completed, it is necessary to use a hard bristle brush to brush back and forth to make the quartz sand fall sufficiently dense.

After laying the quartz sand, it is necessary to check whether it is flat and sufficient, and to add more if there are any deficiencies.

⑦ Rubber particle filling layer

After filling with quartz sand, rubber particles are then filled in the same manner as quartz sand. The specification of rubber particles is 0.5-3mm, and the reference dosage is 3-5 kg/m ² (50mm grass).